Examples
# Display information about the routes to the OSPF ABR and ASBR.
<Sysname> display ospf abr-asbr
OSPF Process 1 with Router ID 192.168.1.2
Type
Destination
Inter
3.3.3.3
Intra
2.2.2.2
Table 1-1 display ospf abr-asbr command output description
Type
Destination
Area
Cost
Nexthop
RtType
display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
ip-address: IP address, in dotted decimal format.
mask: IP address mask, in dotted decimal format.
mask-length: Mask length, in the range 0 to 32 bits.
Description
Use the display ospf asbr-summary command to display information about the redistributed routes
that are summarized.
If no OSPF process is specified, related information of all OSPF processes is displayed.
Routing Table to ABR and ASBR
Area
0.0.0.0
0.0.0.0
Field
Cost
Nexthop
3124
10.1.1.2
1562
10.1.1.2
Type of the route to the ABR or ASBR:
Intra: intra-area route
Inter: Inter-area route
Router ID of an ABR/ASBR
ID of the area of the next hop
Cost from the router to the ABR/ASBR
Next hop address
Router type: ABR, ASBR
1-9
RtType
ASBR
ABR
Description