Timer Join-Prune (Ipv6 Pim View) - 3Com S7906E Command Reference Manual

timer join-prune (IPv6 PIM view)

Syntax
timer join-prune interval
undo timer join-prune
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval: Join/prune interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the timer join-prune command to configure the join/prune interval globally.
Use the undo timer join-prune command to restore the system default.
By default, the join/prune interval is 60 seconds.
Related commands: pim ipv6 timer join-prune.
Examples
# Set the global join/prune interval to 80 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] timer join-prune 80
1-49