Display Ripng Database - 3Com S7906E Command Reference Manual

Examples
# Display the running status and configuration information of all configured RIPng processes.
<Sysname> display ripng
RIPng process : 1
Preference : 100
Checkzero : Enabled
Default Cost : 0
Maximum number of balanced paths : 3
Update time
Suppress time
Number of periodic updates sent : 0
Number of trigger updates sent : 0
Table 1-1 display ripng command output description
Field
RIPng process
Preference
Checkzero
Default Cost
Maximum number of balanced paths
Update time
Timeout time
Suppress time
Garbage-Collect time
Number of periodic updates sent
Number of trigger updates sent

display ripng database

Syntax
display ripng process-id database
View
Any view
Default Level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
: 30 sec(s) Timeout time
: 120 sec(s) Garbage-Collect time :
1-3
: 180 sec(s)
240 sec(s)
Description
RIPng process ID
RIPng route priority
Indicates whether zero field check for RIPng
packet headers is enabled
Default metric of redistributed routes
Maximum number of load balanced routes
RIPng update interval, in seconds
RIPng timeout interval, in seconds
RIPng suppress interval, in seconds
RIPng garbage collection interval, in seconds
Number of periodic updates sent
Number of triggered updates sent