Peer Advertise-Ext-Community (Bgp/Bgp-Vpn Instance View); Peer Allow-As-Loop (Bgp/Bgp-Vpn Instance View) - 3Com S7906E Command Reference Manual

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test advertise-community

peer advertise-ext-community (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } advertise-ext-community
undo peer { group-name | ip-address } advertise-ext-community
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use the peer advertise-ext-community command to advertise the extended community attribute to a
peer/peer group.
Use the undo peer advertise-ext-community command to disable the extended community attribute
advertisement to a peer/peer group.
By default, no extended community attribute is advertised to a peer/peer group.
For related information, refer to the ip extcommunity-list, if-match extcommunity and apply
extcommunity commands in Routing Policy Commands of the IP Routing Volume.
Examples
# In BGP view, advertise the extended community attribute to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test advertise-ext-community
# In BGP-VPN view, advertise the extended community attribute to the peer group test (the VPN has
been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test advertise-community

peer allow-as-loop (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } allow-as-loop [ number ]
1-40