Peer Route-Limit (Bgp/Bgp-Vpn Instance View) - 3Com S7906E Command Reference Manual

View
BGP view
Default Level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use the peer reflect-client command to configure the router as a route reflector and specify a
peer/peer group as a client.
Use the undo peer reflect-client command to remove the configuration.
By default, neither the route reflector nor the client is configured.
Related commands: reflect between-clients and reflect cluster-id.
Examples
# In BGP view, configure the local device as a route reflector and specify the IBGP peer group test as a
client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test reflect-client

peer route-limit (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } route-limit prefix-number [ { alert-only | reconnect reconnect-time }
| percentage-value ] *
undo peer { group-name | ip-address } route-limit
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
prefix-number: Number of prefixes that can be received from the peer or peer group, in the range 1 to
128000. If the number of prefixes received from the peer/peer group reaches the prefix-number, the
router will tear down the connection to the peer/peer group.
alert-only: If the number of prefixes received from the peer/peer group reaches the prefix-number, the
router will not tear down the connection to the peer/peer group but display an alarm message.
1-59