Ipv6-Family; Network (Ipv6 Address Family View) - 3Com S7906E Command Reference Manual

Examples
# Redistribute routes from RIPng 1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] import-route ripng 1

ipv6-family

Syntax
ipv6-family
undo ipv6-family
View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the ipv6-family command to enter IPv6 address family view.
Use the undo ipv6-family command to remove all configurations from the view.
IPv4 BGP unicast view is the default.
Examples
# Enter IPv6 address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6]

network (IPv6 address family view)

Syntax
network ipv6-address prefix-length [ short-cut | route-policy route-policy-name ]
undo network ipv6-address prefix-length [ short-cut ]
View
IPv6 address family view
Default Level
2: System level
1-25