Report-Aggregation (Igmp-Snooping View); Reset Igmp-Snooping Group - 3Com S7906E Command Reference Manual

Examples
# Enable the multicast group replacement function globally in VLAN 2.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] overflow-replace vlan 2

report-aggregation (IGMP-Snooping view)

Syntax
report-aggregation
undo report-aggregation
View
IGMP-Snooping view
Default Level
2: System level
Parameters
None
Description
Use the report-aggregation command to enable IGMP report suppression.
Use the undo report-aggregation command to disable IGMP report suppression.
By default, IGMP report suppression is enabled.
This command works on both IGMP Snooping–enabled VLANs and VLANs with IGMP enabled on their
VLAN interfaces.
Examples
# Disable IGMP report suppression.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] undo report-aggregation

reset igmp-snooping group

Syntax
reset igmp-snooping group { group-address | all } [ vlan vlan-id ]
View
User view
Default Level
2: System level
1-26