3Com S7906E Command Reference Manual page 968

Parameters
process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
external: Displays information about AS-external LSAs.
inter-prefix: Displays information about Inter-area-prefix LSAs.
inter-router: Displays information about Inter-area-router LSAs.
intra-prefix: Displays information about Intra-area-prefix LSAs.
link: Displays information about Link-LSAs.
network: Displays information about Network-LSAs.
router: Displays information about Router-LSAs.
link-state-id: Link state ID, an IPv4 address.
originate-router router-id: ID of the advertising router .
total: Displays the LSA statistics information in the LSDB.
Description
Use the display ospfv3 lsdb command to display OSPFv3 LSDB information.
Examples
# Display OSPFv3 LSDB information.
<Sysname> display ospfv3 lsdb
OSPFv3 Router with ID (1.1.1.1) (Process 1)
----------------------------------------------------------------
Link State ID
2.50.0.99
----------------------------------------------------------------
Link State ID
0.0.0.0
----------------------------------------------------------------
Link State ID
0.0.0.1
Table 1-3 display ospfv3 lsdb command output description
Field
Link-LSA
Link State ID
Origin Router
Age
Link-LSA (Interface Vlan-interface100)
Origin Router Age
1.1.1.1 0212
Router-LSA (Area 0.0.0.0)
Origin Router Age
1.1.1.1 0167
Intra-Area-Prefix-LSA (Area 0.0.0.0)
Origin Router Age
1.1.1.1 0162
Each Link-LSA describes the IPv6 address prefix of the link and
Link-local address of the router
Link State ID
Originating Router
Age of LSAs
SeqNum CkSum Prefix
0x80000002 0x1053
SeqNum CkSum Link
0x80000004 0x0a21
SeqNum CkSum Prefix
0x80000004 0x0cac
Description
1-9
1
0
Reference
1 Router-LSA