Dhcp Server Detect - 3Com S7906E Command Reference Manual

By default, the DHCP server is enabled on an interface.
Examples
# Enable the DHCP server on VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp select server global-pool

dhcp server detect

Syntax
dhcp server detect
undo dhcp server detect
View
System view
Default Level
2: System level
Parameters
None
Description
Use the dhcp server detect command to enable unauthorized DHCP server detection.
Use the undo dhcp server detect command to disable the function.
By default, the function is disabled.
Examples
# Enable unauthorized DHCP server detection.
<Sysname> system-view
[Sysname] dhcp server detect
dhcp server forbidden-ip
Syntax
dhcp server forbidden-ip low-ip-address [ high-ip-address ]
undo dhcp server forbidden-ip low-ip-address [ high-ip-address ]
View
System view
Default Level
2: System level
1-4