Display Mld Routing-Table - 3Com S7906E Command Reference Manual

Other-querier-present-timer-expiry
Total 1 MLD Group reported

display mld routing-table

Syntax
display mld routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] ]
*
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number ranging from 0 to F.
prefix-length: Prefix length of the multicast source or multicast group address. For a multicast source
address, this argument has an effective value range of 0 to 128; for a multicast group address, it has an
effective value range of 8 to 128. The system default is 128 in both cases.
Description
Use the display mld routing-table command to view the information of the MLD routing table.
Examples
# View the information of the MLD routing table.
<Sysname> display mld routing-table
Routing table
Total 1 entry
00001. (*, FF1E::101)
List of 1 downstream interface
Vlan-interface1 (FE80::200:5EFF:FE71:3800),
Table 1-4 display mld routing-table command output description
Routing table
00001
Field
Protocol: MLD
Field
MLD routing table
Sequence number of this (*, G) entry
Remaining time of MLD other querier present
timer , where "off" means that the timer never
times out
Total number of MLD groups the interface has
dynamically joined
Description
1-6
Description