Display Bgp Ipv6 Multicast Routing-Table As-Path-Acl - 3Com S7906E Command Reference Manual

Field
Ogn

display bgp ipv6 multicast routing-table as-path-acl

Syntax
display bgp ipv6 multicast routing-table as-path-acl as-path-acl-number
View
Any view
Default Level
1: Monitor level
Parameters
as-path-acl-number: Displays routing information matching an AS path ACL numbered 1 to 256
Description
Use the display bgp ipv6 multicast routing-table as-path-acl command to display the IPv6 MBGP
routes matching the specified AS path ACL.
Examples
# Display the IPv6 MBGP routes matching AS path ACL 20.
<Sysname> display bgp ipv6 multicast routing-table as-path-acl 20
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
*> Network : 30:30::
NextHop : 30:30::30:1
PrefVal : 0
MED : 0
Path/Ogn: i
Refer to Table 1-7
Origin attribute of the route:
i
e
?
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
for description on the fields above.
Description
Indicates the route is interior to the AS. Summary routes
and routes injected with the network command are
considered IGP routes.
Indicates that the route is learned from the Exterior
Gateway Protocol (EGP).
It indicates that the origin of the route is unknown and the
route is learned by some other means. BGP sets the
Origin attribute of routes learned from other IGP
protocols to incomplete.
PrefixLen : 64
LocPrf
Label
1-17
:
: NULL