Isis Enable; Isis Mesh-Group - 3Com S7906E Command Reference Manual

[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis dis-priority 127 level-2

isis enable

Syntax
isis enable [ process-id ]
undo isis enable
View
Interface view
Default Level
2: System level
Parameters
process-id: Specifies a IS-IS process ID, ranging from 1 to 65535. The default is 1.
Description
Use the isis enable command to enable an IS-IS process on the interface.
Use the undo isis enable command to disable IS-IS.
No IS-IS routing process is enabled on an interface by default.
Related commands: isis, network-entity.
Examples
# Create IS-IS routing process 1, and enable the IS-IS routing process on VLAN-interface 10.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis enable 1

isis mesh-group

Syntax
isis mesh-group { mesh-group-number | mesh-blocked }
undo isis mesh-group
View
Interface view
Default Level
2: System level
1-41