Display Ipv6 Routing-Table - 3Com S7906E Command Reference Manual

Parameters
None
Description
Use the display ip relay-tunnel command to display recursive tunnel information.
Examples
# Display recursive tunnel information.
<Sysname> display ip relay-tunnel
Total Number of Relay-tunnel is: 1.
Dest/Mask: 40.40.40.40/255.255.255.255
Related instance id(s): 1(1) 2(1) 3(1) 4(1)
Table 1-5 display ip relay-tunnel command output description
Total Number of Relay-tunnel
Dest/Mask
Related instance id(s)

display ipv6 routing-table

Syntax
display ipv6 routing-table
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ipv6 routing-table command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes, namely, the brief information about the current optimal
routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Field
Total number of recursive tunnels
Destination address/mask of the recursive tunnel
The number in the parentheses after each instance ID
indicates the number of routes that have used the recursive
tunnel in the routing table corresponding to the instance ID.
1-14
Description