Startup-Query-Count (Mld View) - 3Com S7906E Command Reference Manual

Default level
2: System level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number ranging from 0 to F.
prefix-length: Prefix length of the IPv6 multicast group address, in the range of 8 to 128.
ipv6-source-address: Specifies a multicast source by its IPv6 address.
all: Removes all MLD SSM mappings.
Description
Use the ssm-mapping command to configure an MLD SSM mapping.
Use the undo ssm-mapping command to remove one or all MLD SSM mappings.
By default, no MLD SSM mappings are configured.
Related commands: mld ssm-mapping enable, display mld ssm-mapping.
Examples
# Configure an MLD SSM mapping for multicast group FF1E::101/64 and multicast source 1::1.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] ssm-mapping ff1e::101 64 1::1

startup-query-count (MLD view)

Syntax
startup-query-count value
undo startup-query-count
View
MLD view
Default Level
2: System level
Parameters
value: Startup query count, namely, the number of queries the MLD querier sends on startup, with an
effective range of 2 to 5.
Description
Use the startup-query-count command to configure the startup query count globally.
Use the undo startup-query-count command to restore the system default.
By default, the startup query count is set to the MLD querier robustness variable.
1-26