Import-Route (Bgp/Bgp-Vpn Instance View) - 3Com S7906E Command Reference Manual

[Sysname-bgp-vpn1] peer 10.1.2.1 group test

import-route (BGP/BGP-VPN instance view)

Syntax
import-route protocol [ process-id | all-processes ] [ med med-value | route-policy
route-policy-name ] *
undo import-route protocol [ process-id | all-processes ]
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be direct, isis, ospf, rip or
static at present.
process-id: Process ID, in the range 1 to 65535. The default is 1. It is available only when the protocol is
isis, ospf, or rip.
all-processes: Redistributes routes from all the processes of the specified protocol. This keyword
takes effect only when the protocol is rip, ospf, or isis.
med-value: Specifies a MED value for redistributed routes, ranging from 0 to 4294967295. If the
argument is not specified, the cost of the redistributed route is used as its MED in the BGP routing
domain.
route-policy-name: Name of a routing policy used to filter redistributed routes, a string of 1 to 19
characters.
Description
Use the import-route command to configure BGP to redistribute routes from a specified routing
protocol and advertise redistributed routes.
Use the undo import-route command to disable route redistribution from a routing protocol.
By default, BGP does not redistribute routes from other protocols.
The ORIGIN attribute of routes redistributed with the import-route command is incomplete.
Examples
# In BGP view, redistribute routes from RIP.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] import-route rip
# In BGP-VPN instance view, redistribute routes from RIP (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] import-route rip
1-36