Field Added To The Interface Display; New System Uptime Menu - 3Com CoreBuilder 2500 Software Installation And Release Notes

32 A A: N F
PPENDIX EW
Field Added to the
Interface Display
New System
Uptime Menu
I S
EATURES IN NTELLIGENT WITCHING
A new field, State, has been added to the interface display table,
allowing you to view the state of all interfaces configured for each
switching module in the system.
The interface state is determined based on the state of all ports
associated with the interface. For IP, the state displayed is either Up
or Down:
The interface state is displayed as Down if no port in the defined
interface, including those in overlapping subnetworks, has established
link status. Link status is not established for FDDI DAS ports when
neither the A nor the B port has established link status.
The interface state is displayed as Up if one or more ports in the
defined interface, including those in overlapping subnetworks, have
established link status.
As the interface state changes, transitions are reflected in the
corresponding tables for all directly connected and associated routes.
For IP transitions, all routes that are associated with the interface time out
in the same manner as do learned routes that are not updated.
If link status is transitioned, previously defined configurations, such as
static routes, do not have to be redefined.
A menu option was added so that you can display the time — in minutes,
hours, and days — since the last system reboot occurred.
To display system upTime, from the top level of the Administration
Console, enter system upTime
S V 8.1.1
OFTWARE ERSION