Isis Ipv6 Enable - 3Com S7906E Command Reference Manual

[Sysname-isis-1] ipv6 summary 2002:: 32

isis ipv6 enable

Syntax
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
View
Interface view
Default Level
2: System level
Parameters
process-id: IS-IS process ID, ranging from 1 to 65535. The default is 1.
Description
Use the isis ipv6 enable command to enable IPv6 for the specified IS-IS process on the interface.
Use the undo isis ipv6 enable command to disable the configuration.
IPv6 is disabled on the interface by default.
Examples
# Enable global IPv6, create IS-IS routing process 1, enable IPv6 for the process, and enable IPv6 for
the process on VLAN-interface100.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
[Sysname-isis-1] quit
[Sysname] interface Vlan-interface 100
[Sysname--Vlan-interface100] ipv6 address 2002::1/64
[Sysname--Vlan-interface100] isis ipv6 enable 1
1-12