Reset Bgp; Reset Bgp Dampening - 3Com S7906E Command Reference Manual

reset bgp

Syntax
reset bgp { all | as-number | ip-address [ flap-info ] | group group-name | external | internal }
View
User view
Default Level
1: Monitor level
Parameters
all: Resets all BGP connections.
as-number: Resets BGP connections to peers in the AS.
ip-address: Specifies the IP address of a peer with which to reset the connection.
flap-info: Clears routing flap information.
group group-name: Resets connections with the specified BGP peer group.
external: Resets all the EBGP connections.
internal: Resets all the IBGP connections.
Description
Use the reset bgp command to reset specified BGP connections.
Examples
# Reset all the BGP connections.
<Sysname> reset bgp all

reset bgp dampening

Syntax
reset bgp dampening [ ip-address [ mask | mask-length ] ]
View
User view
Default Level
1: Monitor level
Parameters
ip-address: Destination IP address of a route.
mask: Mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
1-67