Reset Igmp-Snooping Statistics; Router-Aging-Time (Igmp-Snooping View) - 3Com S7906E Command Reference Manual

Parameters
group-address: Clears the information about the specified multicast group. The value range of
group-address is 224.0.1.0 to 239.255.255.255.
all: Clears all IGMP Snooping multicast group information.
vlan vlan-id: Clears the IGMP Snooping multicast group information in the specified VLAN. The
effective range of vlan-id is 1 to 4094.
Description
Use the reset igmp-snooping group command to clear IGMP Snooping multicast group information.
Note that:
This command works only on IGMP Snooping–enabled VLANs, but not on VLANs with IGMP
enabled on their VLAN interfaces.
This command cannot clear IGMP Snooping multicast group information of static joins.
Examples
# Clear all IGMP Snooping multicast group information.
<Sysname> reset igmp-snooping group all

reset igmp-snooping statistics

Syntax
reset igmp-snooping statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset igmp-snooping statistics command to clear the statistics information of IGMP
messages learned by IGMP Snooping.
Examples
# Clear the statistics information of all kinds of IGMP messages learned by IGMP Snooping.
<Sysname> reset igmp-snooping statistics

router-aging-time (IGMP-Snooping view)

Syntax
router-aging-time interval
undo router-aging-time
1-27