Enable Link-Local-Signaling; Enable Log - 3Com S7906E Command Reference Manual

6300 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

Field
State
Type
Transit Area
Timers

enable link-local-signaling

Syntax
enable link-local-signaling
undo enable link-local-signaling
View
OSPF view
Default Level
2: System level
Parameters
None
Description
Use the enable link-local-signaling command to enable the OSPF link-local signaling (LLC)
capability.
Use the undo enable link-local-signaling command to disable the OSPF link-local signaling
capability.
By default, this capability is disabled.
Examples
# Enable link-local signaling for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling

enable log

Syntax
enable log [ config | error | state ]
undo enable log [ config | error | state ]
View
OSPF view
Interface state
Type: virtual link
Transit area ID
Values of timers: hello, dead, poll (NBMA), retransmit, and interface
transmission delay
1-30
Description

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S7906E and is the answer not in the manual?

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents