3Com S7906E Command Reference Manual page 1216

Related commands: peer connect-interface, peer description, peer mesh-group, peer
minimum-ttl,
sa-request-policy.
Examples
# View the detailed status information of the MSDP peer with the address of 10.110.11.11 in the public
instance.
<Sysname> display msdp peer-status 10.110.11.11
MSDP Peer Information of VPN-Instance: public net
MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Table 1-2 display msdp peer-status command output description
MSDP Peer Information of VPN-Instance: public
net
MSDP Peer
AS
peer request-sa-enable,
Field
peer sa-cache-maximum,
Information of the MSDP peer of the public
network
MSDP peer address
Number of the AS where the MSDP peer is
located. "?" indicates that the system was unable
to obtain the AS number.
1-4
peer sa-policy,
Description
peer