3Com S7906E Command Reference Manual page 1543

regular-expression: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the display mpls ldp session command to display information about LDP sessions.
If you do not specify any parameter, the command displays information about all public network LDP
sessions.
Related commands: mpls ldp (system view), mpls ldp (interface view).
Examples
# Display information about all public network LDP sessions.
<Sysname> display mpls ldp session
Total number of sessions: 1
--------------------------------------------------------------------------
Peer-ID
--------------------------------------------------------------------------
1.1.1.1:0
--------------------------------------------------------------------------
LAM : Label Advertisement Mode
Table 1-4 display mpls ldp session command output description
Field
SsnRole
KA-Sent/Rcv
# Display detailed information about all public network LDP sessions.
<Sysname> display mpls ldp session verbose
LDP Session(s) in Public Network
--------------------------------------------------------------------------
Peer LDP ID
TCP Connection
Session State
Session FT Flag : Off
Reconnect Timer : ---
Negotiated Keepalive Timer
Keepalive Message Sent/Rcvd
Label Advertisement Mode
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism
Session existed time
LDP Extended Discovery Source
Addresses received from peer: (Count: 2)
10.1.1.1
LDP Session(s) in Public Network
Status LAM
Operational DU
Role of the current LSR in the session, Active or Passive
Number of sent Keepalives and that of received Keepalives during the session
: 1.1.1.1:0
: 3.3.3.3 -> 1.1.1.1
: Operational
1.1.1.1
SsnRole FT MD5
Active Off Off
FT : Fault Tolerance
Description
Local LDP ID
Session Role
MD5 Flag
Recovery Timer : ---
: 45 Sec
: 6/6 (Message Count)
: Downstream Unsolicited
: Extended
: 000:00:01 (DDD:HH:MM)
: Remote peer: 1
1-11
KA-Sent/Rcv
4582/4582
: 3.3.3.3:0
: Active
: Off