Mpls L2Vc - 3Com S7906E Command Reference Manual

View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the l2vpn-family command to enter BGP L2VPN address family view.
Use the undo l2vpn-family command to delete all configurations for the BGP L2VPN address family.
Examples
# Enter BGP L2VPN address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn]

mpls l2vc

Syntax
mpls l2vc destination vcid [ tunnel-policy tunnel-policy-name ] [ control-word | no-control-word ]
undo mpls l2vc
View
Interface view
Default Level
2: System level
Parameters
destination: IP address of the peer PE.
vc-id: VC ID of the L2VPN connection, in the range 1 to 4294967295.
tunnel-policy-name: Tunneling policy for the VC, a string of 1 to 19 characters.
control-word: Enables the control word option.
no-control-word: Disables the control word option.
Description
Use the mpls l2vc command to create a Martini L2VPN connection.
Use the undo mpls l2vc command to delete the Martini connection on the CE interface.
If you do not specify the tunneling policy, or specify the tunneling policy name but do not configure
the policy, the default policy is used. The default tunneling policy uses LSP tunnels and the load
balance number of one.
1-21