Peer Next-Hop-Local (Ipv6 Mbgp Address Family View) - 3Com S7906E Command Reference Manual

Examples
# Save the original routing information from IPv6 MBGP peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 keep-all-routes

peer next-hop-local (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } next-hop-local
undo peer { ipv6-group-name | ipv6-address } next-hop-local
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
ipv6-group-name: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of an IPv6 MBGP peer.
Description
Use the peer next-hop-local command to configure the next hop of routes advertised to an IPv6 MBGP
peer/peer group as the local router.
Use the undo peer next-hop-local command to restore the default.
By default, an IPv6 MBGP speaker specifies itself as the next hop for routes outgoing to an IPv6
multicast eBGP peer/peer group rather than an IPv6 multicast iBGP peer/peer group.
Examples
# Set the next hop of routes advertised to iBGP peer group test to the advertising router.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test internal
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer test enable
[Sysname-bgp-af-ipv6-mul] peer test next-hop-local
1-37