Reset Bgp Ipv6 Multicast - 3Com S7906E Command Reference Manual

Parameters
ipv6-address: Soft-resets the connection to the specified IPv6 MBGP peer.
all: Soft-resets all IPv6 MBGP connections.
external: Soft-resets IPv6 multicast eBGP connections.
group ipv6-group-name: Soft-resets connections to an IPv6 multicast peer group. The name of the
peer group is a string of 1 to 47 characters.
internal: Soft-resets IPv6 multicast iBGP connections.
export: Performs soft-reset in outbound direction.
import: Performs soft-reset in inbound direction.
Description
Use the refresh bgp ipv6 multicast command to soft-reset specified IPv6 MBGP connections. With
this feature, you can refresh the IPv6 MBGP routing table and apply a new policy without tearing down
IPv6 MBGP connections.
To perform IPv6 MBGP soft-reset, all routers in the network should support route-refresh. If a peer not
supporting route refresh exists in the network, you need to use the peer keep-all-routes command on
the local router to save all route updates from the peer before performing soft reset.
Examples
# Soft-reset inbound IPv6 MBGP connections.
<Sysname> refresh bgp ipv6 multicast all import

reset bgp ipv6 multicast

Syntax
reset bgp ipv6 multicast { as-number | ipv6-address | all | group ipv6-group-name | external |
internal }
View
User view
Default Level
2: System level
Parameters
as-number: Resets the connections to IPv6 MBGP peers in the specified AS.
ipv6-address: Resets the connection to the specified peer.
flap-info: Clears routing flap information.
all: Resets all IPv6 MBGP connections.
group ipv6-group-name: Resets the connections to the specified IPv6 MBGP peer group.
external: Resets all the IPv6 multicast eBGP connections.
internal: Resets all the IPv6 multicast iBGP connections.
1-45