Peer Vpn-Instance Group - 3Com S7906E Command Reference Manual

[Sysname-bgp-vpn1] quit
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer ebgp vpn-instance vpn1 enable

peer vpn-instance group

Syntax
peer peer-address vpn-instance vpn-instance-name group group-name
undo peer peer-address vpn-instance vpn-instance-name group group-name
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
peer-address: IP address of the peer.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters..
Description
Use the peer vpn-instance group command to add a peer to a nested VPN peer group.
Use the undo peer vpn-instance group command to remove a peer from a nested VPN peer group.
By default, a peer is not in any nested peer group.
Note that:
This configuration takes effect only after the nested VPN function is enabled.
Deleting the VPN instance to which a peer belongs will also delete the configuration of this
command.
Examples
# Add peer 1.1.1.1 to the nested VPN peer group named ebgp.
<Sysname> system-view
[Sysname] bgp 10
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] group ebgp external
[Sysname-bgp-vpn1] peer 1.1.1.1 as-number 600
[Sysname-bgp-vpn1] peer 1.1.1.1 group ebgp
[Sysname-bgp-vpn1] quit
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer ebgp vpn-instance vpn1 enable
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 vpn-instance vpn1 group ebgp
1-47