3Com S7906E Command Reference Manual page 1640

View
OSPF view
Default Level
2: System level
Parameters
domain-id: OSPF domain ID, in integer or dotted decimal notation. If it is in integer, it ranges from 0 to
4,294,967,295.
secondary: Uses the domain ID as secondary. With this keyword not specified, the domain ID
configured is primary.
Description
Use the domain-id command to configure an OSPF domain ID.
Use the undo domain-id command to restore the default.
By default, the OSPF domain ID is 0.
With no parameter specified, the undo domain-id command deletes all domain IDs.
Usually, routes injected from PEs are advertised as External-LSAs. However, routes to different
destinations in the same OSPF domain must be advertised as Type-3 LSAs. Therefore, using the same
domain ID for an OSPF domain is required.
Examples
# Configure the OSPF domain ID.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] domain-id 234
export route-policy
Syntax
export route-policy route-policy
undo export route-policy
View
VPN instance view
Default Level
2: System level
Parameters
route-policy: Name of the export routing policy for the VPN instance, a string of 1 to 19 characters.
Description
Use the export route-policy command to apply an export routing policy to a VPN instance.
Use the undo export route-policy command to remove the application.
1-28