3Com S7906E Command Reference Manual page 1626

Field
BGP version
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast
Address family VPNv4
Received
Sent
Maximum allowed prefix number
Threshold
Optional capabilities
Route refresh capability
Nesting-vpn peer (vpn-instance vrf1)
Connect-interface
Peer Preferred Value
# Display the log information of BGP VPNv4 peer whose address is 1.1.1.1.
<sysname> display bgp vpnv4 vpn-instance vpn1 peer 1.1.1.1 log-info
Peer : 1.1.1.1
Date Time
10-Jul-2008 15:46:17 Down
Version of BGP that the peer runs
Router ID of the remote router
Current status of BGP
Duration since the peer is established
Current event of the peer
State that BGP was in before transitioning to the
current status
Local and remote BGP port numbers
Settings of the local timers, including the active hold
interval and keepalive interval
Received active hold interval
Negotiated active hold interval
Optional capabilities of the peer
The peer supports multiprotocol extension.
The peer supports route refresh capability.
IPv4 unicast family capability
IPv4 address group VPNv4 capability
Counts of received messages and received update
messages
Counts of sent messages and the number of sent
update messages
Maximum number of routes that the VPN instance
supports
Threshold value
Local optional capabilities
Whether the route refresh capability is supported
Whether the VPNv4 peer is a nested VPN peer
Whether a source interface is configured for route
update messages
Weight configured for routes from the peer
State Notification
Error/SubError
Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
1-14
Description