Field
Received
Sent
Maximum allowed prefix number
Threshold
BFD
Routing policy configured
# Display L2VPN information with the RD being 100:1 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
CE ID
Label Offset
4
0
Table 1-4 display bgp l2vpn route-distinguisher command output description
Field
Origin codes
bgp.l2vpn
CE ID
nexthop
pref
as-path
# Display L2VPN information with the RD being 100:1 and the CE ID being 4 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
CE ID
Label Offset
1
0
Label Base
nexthop
132096
3.3.3.9
Route origin codes, which can be:
i – IGP: Indicates that the network layer reachability information is from
within the AS
e – EGP: Indicates that the network layer reachability information is learned
through EGP
? – incomplete: Indicates that the network layer reachability information is
learned through other ways
Number of BGP L2VPNs
CE number in the VPN
IP address of the next hop
Preference
AS-PATH of the route
Label Base
nexthop
8202
3.3.3.9
1-7
Description
Total number of received messages and that of
received update messages
Total number of sent messages and that of
received update messages
Maximum number of routes allowed
Threshold value
Whether BFD is enabled for the peer
Routing policy specified for the peer
pref
as-path
100
Description
pref
as-path
100