Update Admin-Access Password; Adm: Set Admin Password - 3Com CoreBuilder 9000 User Manual

Update Admin-access
Password
Update the admin-access password. Enter the new password a second
time to confirm your entry. You are prompted for the existing password
before you enter the new password.
To accept the default password, press Enter.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
Old password
New password
New password
confirmation
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 1 3
The following dialog is displayed. Note that the passwords themselves are
not displayed.
Enter the old admin password: oldpass
Enter the new admin password: newpass
Enter the new admin password again: newpass
The password has been changed.
The admin-access password is updated.
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(1) PAS: Password Setup

(3) ADM: Set Admin Password

Format or Range
Enter the old password.
0 to 8 alphanumeric characters
Enter the password exactly as you did before.
1 1 1 3 [parameters]
The admin-access password is updated.
The password has been changed.
Password Setup 63