Display Bgp Vpnv4 Peer - 3Com S7906E Command Reference Manual

display bgp vpnv4 peer

Syntax
display bgp vpnv4 all peer [ ip-address verbose | verbose ]
display bgp vpnv4 vpn-instance vpn-instance-name peer [ group-name
{ log-info | verbose } | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.
vpn-instance-name: Name of the VPN instance, a string of 1 to 31 characters.
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
log-info: Displays log information.
ip-address: IP address of the peer.
verbose: Displays detailed information.
Description
Use the display bgp vpnv4 peer command to display information about BGP VPNv4 peers.
Examples
# Display information about BGP VPNv4 peers of VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Peer V
10.1.1.1 4
Table 1-5 display bgp vpnv4 vpn-instance peer output description
BGP Local router ID
Peers in established state
Peer
V
AS
MsgRcvd
MsgSent
AS MsgRcvd MsgSent
200 24 29
Field
Peers in established state : 1
OutQ PrefRcv Up/Down
0 1
Description
Router ID of the local BGP router
Number of peers in the state of established
IP address of the peer
Version of BGP that the peer runs
AS number of the peer group
Number of messages received
Number of messages sent
1-10
log-info | ip-address
State
00:18:47 Established