Display Mpls Lsp - 3Com S7906E Command Reference Manual

display mpls lsp

Syntax
display mpls lsp [ incoming-interface interface-type interface-number ] [ outgoing-interface
interface-type interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ asbr |
[ vpn-instance vpn-instance-name ] [ protocol { bgp | bgp-ipv6 | ldp | static } ] ] [ egress | ingress |
transit ] [ { exclude | include } dest-addr mask-length ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
incoming-interface interface-type interface-number: Specifies LSPs using the given interface as the
incoming interface. The interface-type interface-number combination specifies an interface by its type
and number.
outgoing-interface interface-type interface-number: Specifies LSPs using the given interface as the
outgoing interface. The interface-type interface-number combination specifies an interface by its type
and number.
in-label in-label-value: Specifies LSPs using the given incoming label. The value of the label ranges 0
to 1048575.
out-label out-label-value: Specifies LSPs using the given outgoing label. The value of the label ranges
0 to 1048575.
asbr: Specifies LSPs established by ASBRs.
vpn-instance vpn-instance-name: Specifies LSPs of a VPN instance. The VPN instance name is a
case-sensitive string of 1 to 31 characters.
protocol: Specifies LSPs established by a given protocol.
bgp: Specifies BGP LSPs.
bgp-ipv6: Specifies IPv6 BGP LSPs, that is, BGP4+ LSPs.
ldp: Specifies LDP LSPs.
static: Specifies static LSPs.
egress: Specifies LSPs taking the current LSR as the egress.
ingress: Specifies LSPs taking the current LSR as the ingress.
transit: Specifies LSPs taking the current LSR as a transit LSR.
exclude: Specifies LSPs other than the one for the given FEC.
include: Specifies the LSP for the given FEC.
dest-addr mask-length: Specifies a FEC by its destination address and the length of the mask. The
mask length is in the range 0 to 32.
verbose: Displays detailed information.
1-14