Display Mpls Static-Lsp - 3Com S7906E Command Reference Manual

Table 1-10 display mpls route-state command output description
LSP-COUNT
VPN-INDEX

display mpls static-lsp

Syntax
display mpls static-lsp [ lsp-name lsp-name ] [ { exclude | include } dest-addr mask-length ]
[ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
lsp-name lsp-name: Specifies an LSP by its name, which is a string of 1 to 15 characters.
exclude: Specifies LSPs other than the one for the given FEC.
include: Specifies the LSP for the given FEC.
dest-addr mask-length: Specifies a FEC by its destination address and the length of the mask. The
mask length is in the range 0 to 32.
verbose: Displays detailed information.
Description
Use the display mpls static-lsp command to display information about static LSPs.
Related commands: display mpls lsp, display mpls statistics lsp.
Examples
# Display brief information about all static LSPs.
<Sysname> display mpls static-lsp
Name FEC
lsp1 3.3.3.9/32
# Display detailed information about all static LSPs.
<Sysname> display mpls static-lsp verbose
No
LSP-Name
LSR-Type
FEC
In-Label
Out-Label
In-Interface
Field
I/O Label
NULL/100
: 1
: lsp1
: Ingress
: 3.3.3.9/32
: NULL
: 100
: -
Description
Number of LSPs
Index number of the VPN instance
I/O If
-/Vlan1
1-19
State
Up