Mld-Snooping Drop-Unknown - 3Com S7906E Command Reference Manual

Use the undo max-response-time command to restore the system default.
By default, the maximum response time for MLD general queries is 10 seconds.
This command works only on MLD Snooping–enabled VLANs, but not on VLANs with MLD enabled on
their VLAN interfaces.
Related commands: mld-snooping max-response-time, mld-snooping query-interval.
Examples
# Set the maximum response time for MLD general queries globally to 5 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
mld-snooping
Syntax
mld-snooping
undo mld-snooping
View
System view
Default Level
2: System level
Parameters
None
Description
Use the mld-snooping command to enable MLD Snooping globally and enter MLD-Snooping view.
Use the undo mld-snooping command to disable MLD Snooping globally.
By default, MLD Snooping is disabled.
Related commands: mld-snooping enable.
Examples
# Enable MLD Snooping globally and enter MLD-Snooping view.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping]

mld-snooping drop-unknown

Syntax
mld-snooping drop-unknown
undo mld-snooping drop-unknown
1-8