Mld-Snooping Last-Listener-Query-Interval - 3Com S7906E Command Reference Manual

ipv6-source-address: Address of the IPv6 multicast source that the simulated host is to join.
vlan vlan-id: Specifies a VLAN that comprises the port(s), where vlan-id is in the range of 1 to 4094.
Description
Use the mld-snooping host-join command to configure the current port(s) as simulated member
host(s) for the specified IPv6 multicast group or source and group.
Use the undo mld-snooping host-join command to remove the current port(s) as simulated member
host(s) for the specified IPv6 multicast group or source and group.
By default, no ports are configured as static member ports for any IPv6 multicast group or source and
group.
Note that:
This command works on both MLD Snooping–enabled VLANs and VLANs with MLD enabled on
their VLAN interfaces, and the version of MLD on the simulated host depends on the version of
MLD Snooping running in the VLAN or the version of MLD running on the VLAN interface.
The source-ip ipv6-source-address option in the command is meaningful only for MLD Snooping
version 2. If MLD Snooping version 1 is running, although you can include source-ip
ipv6-source-address in your command, the simulated host responses with only an MLDv1 report
when receiving a query message.
If configured in Ethernet interface view or Layer 2 aggregate interface view, this feature takes effect
only if the interface belongs to the specified VLAN.
If configured in port group view, this feature takes effect only on those ports in this port group that
belong to the specified VLAN.
Examples
# Configure Ethernet 2/0/1 in VLAN 2 to join (2002::22, FF3E::101) as a simulated host.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
[Sysname-vlan2] quit
[Sysname] interface ethernet2/0/1
[Sysname-Ethernet2/0/1] mld-snooping host-join ff3e::101 source-ip 2002::22 vlan 2

mld-snooping last-listener-query-interval

Syntax
mld-snooping last-listener-query-interval interval
undo mld-snooping last-listener-query-interval
View
VLAN view
Default Level
2: System level
1-15