Display L2Vpn Ccc-Interface Vc-Type - 3Com S7906E Command Reference Manual

State
Intf
In-label
Out-label
Nexthop
Table 1-7 display ccc command output description
Total ccc vc
Local ccc vc
Remote ccc vc
Name
Type
State
Intf
In-label
Out-label
Nexthop

display l2vpn ccc-interface vc-type

Syntax
display l2vpn ccc-interface vc-type { all | bgp-vc | ccc | ldp-vc | static-vc } [ up | down ]
View
Any view
Default Level
1: Monitor level
Parameters
all: Specifies interfaces of any encapsulation types.
bgp-vc: Specifies interfaces of Kompella L2VPN VCs.
ccc: Specifies interfaces of CCC L2VPN VCs.
ldp-vc: Specifies interfaces of Martini L2VPN VCs.
static-vc: Specifies interfaces of SVC L2VPN VCs.
up: Specifies CCC interfaces in the state of UP.
down: Specifies CCC interfaces in the state of DOWN.
Description
Use the display l2vpn ccc-interface vc-type command to display information about specified L2VPN
VC interfaces.
: down
: Vlan-interface2 (up)
: 100
: 200
: 20.1.1.1
Field
1-10
Description
Total number of CCC connections
Number of local CCC connections
Number of remote CCC connections
Name of the CCC connection
Type of the CCC connection
Status of the CCC connection
Interface of the CCC connection
Incoming label
Outgoing label
IP address of the next hop