Eth2/0/1
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
Attribute:
Host port(s):total 1 port.
Eth2/0/2
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port.
Eth2/0/2
Table 1-1 display mld-snooping group command output description
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port,
C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Router port(s)
( 00:01:30 )
IP group address
(::, FF1E::101)
MAC group address
Attribute
Host port(s)
display mld-snooping statistics
Syntax
display mld-snooping statistics
View
Any view
(D) ( 00:01:30 )
Host Port
(D) ( 00:03:23 )
Field
Total number of IPv6 multicast groups
Total number of IPv6 multicast sources
Total number of MAC multicast groups
Port flags: D for dynamic port, S for static port, C
for port copied from a (*, G) entry to an (S, G)
entry
Sub-VLAN flags: R for real egress sub-VLAN
under the current entry, C for sub-VLAN copied
from a (*, G) entry to an (S, G) entry
Number of router ports
Remaining time of the dynamic member port or
router port aging timer. On a distributed device,
to get this time value of a non-aggregation port
that does not belong to the SRPU, you must
specify the number of the slot where the
corresponding board resides; this is not required
on an aggregation port.
Address of IPv6 multicast group
(S, G) entry, :: represents all the multicast
sources
Address of MAC multicast group
Attribute of IPv6 multicast group
Number of member ports
1-2
Description
Need help?
Do you have a question about the S7906E and is the answer not in the manual?
Questions and answers