Display Mpls L2Vpn Connection - 3Com S7906E Command Reference Manual

LB
# Display information about remote CEs of L2VPN vpn1.
<Sysname> display mpls l2vpn vpn-name vpn1 remote-ce
no. ce-id peer-id
1 4 3.3.3.9
Table 1-15 display mpls l2vpn vpn-name remote-ce command output description
no
ce-id
peer-id
LB

display mpls l2vpn connection

Syntax
display mpls l2vpn connection [ vpn-name vpn-name [ remote-ce ce-id | down | up | verbose ] ]
display mpls l2vpn connection [ interface interface-type interface-number | summary]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-name: VPN name, a case insensitive string of 1 to 31 characters that cannot include the character
of "-".
ce-id: ID of the remote CE for the L2VPN connection, in the range 0 to 249.
down: Displays detailed information about the connections that are down.
up: Displays detailed information about the connections that are up. If you specify neither the down nor
the up keyword, the command displays detailed information about connections that are either up or
down.
verbose: Displays detailed information. This keyword is valid only when displaying information about all
connections in a VPN.
interface interface-type interface-number: Specifies an interface by its type and number.
summary: Displays summary information about connections.
Field
route-distinguisher
100:1
Field
1-15
Description
Label block
LB
132096/0/10
Description
Sequence number
CE ID
IP address of the peer
Label block