Peer Public-As-Only (Ipv6 Mbgp Address Family View); Peer Reflect-Client (Ipv6 Mbgp Address Family View) - 3Com S7906E Command Reference Manual

peer public-as-only (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } public-as-only
undo peer { ipv6-group-name | ipv6-address } public-as-only
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
ipv6-group-name: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of an IPv6 MBGP peer.
Description
Use the peer public-as-only command to disable IPv6 MBGP updates to a peer/peer group from
carrying private AS numbers.
Use the undo peer public-as-only command to allow IPv6 MBGP updates to a peer/peer group to
carry private AS numbers.
By default, private AS numbers can be carried in outbound IPv6 MBGP update packets.
The command does not take effect for IPv6 MBGP updates with both public and private AS numbers.
The range of private AS numbers is from 64512 to 65535.
Examples
# Disable updates sent to IPv6 MBGP peer 1:2::3:4 from carrying private AS numbers.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 public-as-only

peer reflect-client (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } reflect-client
undo peer { ipv6-group-name | ipv6-address } reflect-client
View
IPv6 MBGP address family view
1-39