Multicast-Vlan Ipv - 3Com S7906E Command Reference Manual

subvlan list:
no subvlan
port list:
no port
Table 1-1 display multicast-vlan ipv6 command output description
Total 4 IPv6 multicast-vlan(s)
IPv6 Multicast vlan
subvlan list
port list

multicast-vlan ipv6

Syntax
multicast-vlan ipv6 vlan-id
undo multicast-vlan ipv6 { all | vlan-id }
View
System view
Default Level
2: System level
Parameters
vlan-id: Specifies a VLAN by its ID, in the range of 1 to 4094.
all: Deletes all IPv6 multicast VLANs.
Description
Use the multicast-vlan ipv6 command to configure the specified VLAN as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view.
Use the undo multicast-vlan ipv6 command to remove the specified VLAN as an IPv6 multicast
VLAN.
No VLAN is an IPv6 multicast VLAN by default.
Note that:
The specified VLAN to be configured as an IPv6 multicast VLAN must exist.
The IPv6 multicast VLAN feature cannot be enabled on a device with IPv6 multicast routing
enabled.
For a sub-VLAN-based IPv6 multicast VLAN, you need to enable MLD Snooping only in the IPv6
multicast VLAN; for a port-based IPv6 multicast VLAN, you need to enable MLD Snooping in both
the IPv6 multicast VLAN and all the user VLANs.
Field Description
Total number of IPv6 multicast VLANs
An IPv6 multicast VLAN
List of sub-VLANs of the IPv6 multicast VLAN
Port list of the IPv6 multicast VLAN
1-2