Packets
Errors
Disables
Start Time
End Time
display mpls statistics lsp
Syntax
display mpls statistics lsp { index | all | name lsp-name }
View
Any view
Default Level
1: Monitor level
Parameters
index: Index number of the LSP, in the range 0 to 4294967295.
all: Specifies all LSPs.
lsp-name: Name of the LSP, a string of 1 to 15 characters.
Description
Use the display mpls statistics lsp command to display MPLS statistics for all LSPs or the LSP with a
specified index or name.
To display MPLS statistics, set the statistics interval first. By default, the interval is 0 and the system
does not collect LSP statistics. In this case, the value of every statistic is 0.
Related commands: statistics interval.
Examples
# Display MPLS statistics for all LSPs.
<Sysname> display mpls statistics lsp all
Statistics for Lsp IN : LSP Name /LSP Index :
InSegment
Octets
Packets
Errors
Down
Start Time
End Time
Statistics for Lsp OUT : LSP Name /LSP Index :
OutSegment
Field
: 0
: 0
: 0
: 0
: 2006/05/20
: 2006/05/20
Description
Number of packets processed
Number of errors
Number of MPLS disables
Start time of the statistics
End time of the statistics
DynamicLsp/9217
15:52:30
15:52:30
DynamicLsp/9217
1-22