Display Bgp Vpnv4 Routing-Table Label - 3Com S7906E Command Reference Manual

The following table gives the description on the fields of the display bgp vpnv4 route-distinguisher
routing-table command.
Table 1-11 Output description
Field
BGP Local router ID
Status codes
Origin
Network
NextHop
In/Out Label
MED
LocPrf
Total Number of Routes

display bgp vpnv4 routing-table label

Syntax
display bgp vpnv4 { all | vpn-instance vpn-instance-name } routing-table label
View
Any view
Default Level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.
vpn-instance-name: Name of the VPN instance, a string of 1 to 31 characters.
Description
Use the display bgp vpnv4 routing-table label command to display information about labeled routes
in the BGP routing table.
Examples
# Display information about labeled routes in the BGP routing table.
<Sysname> display bgp vpnv4 all routing-table label
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Router ID of the local BGP router
Route status codes. For valid values, see
Route origin codes. For valid values, see
Network address in the BGP routing table
Address of the next hop
Incoming/outgoing label
Metric associated with the destination network
Local preference
Total number of routes of the specified VPN instance
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Description
1-19
Table 1-1.
Table 1-1.