Mpls Ldp Remote-Peer; Mpls Ldp Timer Hello-Hold - 3Com S7906E Command Reference Manual

Examples
# Enable LDP for interface VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] mpls
[Sysname-Vlan-interface1] mpls ldp

mpls ldp remote-peer

Syntax
mpls ldp remote-peer remote-peer-name
undo mpls ldp remote-peer remote-peer-name
View
System view
Default Level
1: Monitor level
Parameters
remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32 characters.
Description
Use the mpls ldp remote-peer command to create a remote peer entity and enter MPLS LDP remote
peer view.
Use the undo mpls ldp remote-peer command to remove a remote peer entity.
Related commands: remote-ip.
Examples
# Create a remote peer entity named BJI and enter MPLS LDP remote peer view.
<Sysname> system-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji]

mpls ldp timer hello-hold

Syntax
mpls ldp timer hello-hold value
undo mpls ldp timer hello-hold
View
Interface view, MPLS LDP remote peer view
Default Level
1: Monitor level
1-37