Display Mpls Nhlfe - 3Com S7906E Command Reference Manual

ASBR LSP
BGP IPV6 LSP
---------------------------------------------------------------
LSP
CRLSP
Table 1-8 display mpls lsp statistics command output description
Field
Ingress
Transit
Egress
Currently, the S7900E series switches do not support static CR-LSPs, CR-LDP generated CR-LSPs, or
RSVP generated CR-LSPs.

display mpls nhlfe

Syntax
display mpls nhlfe [ token ] [ slot slot-number ] [ include text ]
View
Any view
Default Level
1: Monitor level
Parameters
token: NHLFE entry index. The value range varies by device.
include text: Specifies NHLFE entries including a specified string.
slot slot-number: Specifies the NHLFE entries of the board in a slot.
Description
Use the display mpls nhlfe command to display information about NHLFE entries.
With the token argument not specified, the command displays information about all NHLFE entries.
Examples
# Display information about a specified NHLFE entry.
<Sysname> display mpls nhlfe 2
Out-Interface
----------------------------------------------------------------------
Vlan2
0 0
0 0
1 1
2 2
Number of LSPs taking the current LSR as ingress
Number of LSPs taking the current LSR as transit LSR
Number of LSPs taking the current LSR as egress
Token Oper
2 PUSH
0 0
0 0
0 0
0 0
Description
Nexthop
88.1.1.2
1-17
Deep Stack
1 1024