3Com S7906E Command Reference Manual page 1651

Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
acl-number: ACL number, in the range 2000 to 3999.
export: Filters the routes to be advertised.
import: Filters the received routes.
Description
Use the peer filter-policy command to apply a filtering policy to a peer or peer group.
Use the undo peer filter-policy command to remove the configuration.
By default, no filtering policy is applied to a peer or peer group.
Related commands: peer as-path-acl.
Examples
# Apply a filtering policy to filter the received routes of a peer group.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer test filter-policy 2003 import
peer group
Syntax
peer ip-address group group-name [ as-number as-number ]
undo peer ip-address group group-name
View
BGP-VPNv4 subaddress family view, BGP-L2VPN address family view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
as-number as-number: Specifies an AS number, which ranges from 1 to 65535.
Description
Use the peer group command to add a peer into an existing peer group.
Use the undo peer group command to remove a peer from a peer group.
1-39