3Com S7906E Command Reference Manual page 1515

Parameters
vpn-instance-name: Name of the VPN instance, a string of 1 to 31 characters.
verbose: Displays detailed information.
Description
Use the display ip routing-table vpn-instance command to display the routing information of a VPN
instance.
Examples
# Display the routing information of VPN instance vpn2.
<Sysname> display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5
Destination/Mask
127.0.0.0/8
127.0.0.1/32
10.214.20.0/24
10.214.20.3/32
192.168.10.0/24
Table 1-8 Description on the fields of display ip routing-table vpn-instance
Field
Destinations
Routes
Destination/Mask
Proto
Pre
Cost
NextHop
Interface
display ip vpn-instance
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ]
View
Any view
Default Level
1: Monitor level
Routes : 5
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
RIP 100 1
Number of destination addresses
Number of routes
Destination address/mask length
Protocol discovering the route
Preference of the route
Cost of the route
Address of the next hop along the route
Outbound interface for forwarding packets to the destination segment
1-11
NextHop Interface
127.0.0.1 InLoop0
127.0.0.1 InLoop0
10.214.20.3 Vlan20
127.0.0.1 InLoop0
10.214.20.2 Vlan20
Description