Peer Enable; Peer Filter-Policy (Bgp-Vpnv4 Subaddress Family View) - 3Com S7906E Command Reference Manual

peer enable

Syntax
peer { group-name | ip-address } enable
undo peer { group-name | ip-address } enable
View
BGP-VPNv4 subaddress family view, BGP-L2VPN address family view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
Description
Use the peer enable command to enable a peer or peer group for an address family and enable the
exchange of BGP routing information of the address family.
Use the undo peer enable command to disable the capability.
By default, only IPv4 routing information is exchanged between BGP peers/peer groups.
Examples
# Configure peer 1.1.1.1 and enable the peer for the BGP-VPNv4 subaddress family.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 as-number 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 enable
# Configure peer 1.1.1.1 and enable the peer for the BGP-L2VPN address family.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 as-number 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer 1.1.1.1 enable

peer filter-policy (BGP-VPNv4 subaddress family view)

Syntax
peer { group-name | ip-address } filter-policy acl-number { export | import }
undo peer { group-name | ip-address } filter-policy acl-number { export | import }
View
BGP-VPNv4 subaddress family view
1-38