3Com S7906E Command Reference Manual page 1588

Table 1-1 display bgp l2vpn all command output description
Field
Origin codes
bgp.l2vpn
CE ID
nexthop
pref
as-path
# Display brief information about L2VPN peers in the BGP routing table.
<Sysname> display bgp l2vpn peer
BGP local router ID : 4.4.4.9
Local AS number : 100
Total number of peers : 1
Peer V AS
3.3.3.9 4 100
Table 1-2 display bgp l2vpn peer command output description
Field
BGP local router ID
Peers in established state
Peer
V
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about L2VPN peer 3.3.3.9 in the BGP routing table.
<Sysname> display bgp l2vpn peer 3.3.3.9 verbose
Route origin codes, which can be:
i – IGP: Indicates that the network layer reachability information is from
within the AS
e – EGP: Indicates that the network layer reachability information is
learned through EGP
? – incomplete: Indicates that the network layer reachability
information is learned through other ways
Number of BGP L2VPNs
CE number in the VPN
IP address of the next hop
Local preference
AS-PATH of the route
Peers in established state : 0
MsgRcvd MsgSent OutQ PrefRcv Up/Down
0 0
ID of the local BGP router
Number of peers with BGP sessions in the state of established
IP address of the peer
BGP version that the peer is using
AS number
Number of messages received
Number of messages sent
Number of messages waiting to be sent to the peer
Number of prefixes received
Duration that the BGP session is in the current status
Status of the peer
1-5
Description
State
0 0 00:01:07 Active
Description