Peer Label-Route-Capability (Bgp View, Bgp Vpn Instance View); Peer Next-Hop-Invariable (Bgp-Vpnv4 Subaddress Family View) - 3Com S7906E Command Reference Manual

[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer group1 ip-prefix list1 import

peer label-route-capability (BGP view, BGP VPN instance view)

Syntax
peer { group-name | ip-address } label-route-capability
undo peer { group-name | ip-address } label-route-capability
View
BGP view, BGP VPN instance view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
Description
Use the peer label-route-capability command to enable the exchange of labeled routes with an IPv4
peer or peer group.
Use the undo peer label-route-capability command to disable the capability.
By default, the device does not advertise labeled routes to an IPv4 peer.
According to the networking scheme, the peer label-route-capability command enables the exchange
of labeled IPv4 routes with:
ASBR PEs in the same AS.
PEs in the same AS.
the peer ASBR PE.
Examples
# Specify to exchange labeled IPv4 routes with peer 2.2.2.2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 2.2.2.2 label-route-capability

peer next-hop-invariable (BGP-VPNv4 subaddress family view)

Syntax
peer { group-name | ip-address } next-hop-invariable
undo peer { group-name | ip-address } next-hop-invariable
View
BGP-VPNv4 subaddress family view
1-41