Filter-Policy Import (Bgp-Vpnv4 Subaddress Family View) - 3Com S7906E Command Reference Manual

filter-policy import (BGP-VPNv4 subaddress family view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } import
undo filter-policy import
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
acl-number: IP ACL number, in the range 2000 to 3999.
ip-prefix-name: IP address prefix list name, a string of 1 to 19 characters.
Description
Use the filter-policy import command to specify to filter received routes.
Use the undo filter-policy import command to remove the configuration.
By default, received routes are not filtered.
Only routes that survive the filtering are added into the BGP routing table.
Examples
# In BGP-VPNv4 subaddress family view, specify to use ACL 2255 to filter received routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] filter-policy 2255 import
import route-policy
Syntax
import route-policy route-policy
undo import route-policy
View
VPN instance view
Default Level
2: System level
Parameters
route-policy: Name of the import routing policy for the VPN instance, a string of 1 to 19 characters.
Description
Use the import route-policy command to apply an import routing policy to a VPN instance.
1-31